Introducing

Atom Defender

n-IQ
3 kHz
to
43 GHz
3 THz/s
sweep speed
at 200 kHz RBW
192.5 MHz IF
bandwidth per channel
< 12 dB
max noise figure

Introducing Transformational Security’s cutting-edge multi-channel, phase-coherent radio frequency receiver: the Atom Defender n-IQ. Unparalleled in its class, the revolutionary n-IQ boasts ultra-fast sweeping (≥3 THz/s), delivering unrivaled frequency agility, with an exceptionally low noise floor, achieving extraordinary sensitivity.

Engineered to address modern modulation schemes and the need for wide-bandwidth IQ streaming, the n-IQ is natively VITA 49 compliant, ensuring compatibility and ease of use across a wide variety of deployments and platforms. Experience modern RF detection and prosecution — offered at breakthrough pricing.

Key Specifications

Channels Standard: 2, phase-coherent
Option: 1; 3–8, phase-coherent
Frequency range 3 kHz – 43 GHz
Spectrum sweep speed >3.0 THz/s @ 200 kHz RBW
>1.0 THz/s @ 13 kHz RBW
IF bandwidth 192.5 MHz per channel
IF center frequency 375 MHz
Noise figure 9.5 dB weighted average
88–776 MHz: 8.6 dB
700 MHz–3.5 GHz: 9.4 dB
3.4–8.3 GHz: 10.2 dB
8–16.5 GHz: 9.3 dB
16.5–43 GHz: 9.5 dB
Preselection Sub-harmonic
RX method Superheterodyne
Attenuation 93 dB (62 dB RF, 31 dB calibration)
Tuning Coherent, independent
AGC Based on ADC overload detection
Damage level > +15 dBm
Digital FPGA: AMD Artix™ UltraScale+™ 676 package 10/15/20/25
Embedded processor: TI’s KeyStone 3 ARM/DSP (TDA4AP, TDA4VH)
DDR: 32 GB (SOC), 16 GB (FPGA)
MicroSD: Internal
MicroSD Slot: Externally accessible
Microcontroller: CY8C4248AZI-L475
Internal Frequency Reference Type: OCXO
Frequency: 10 MHz
Frequency stability: 20 ppb
Aging rate: ±10 ppb/day
Disciplining: GPS 1PPS, External 1PPS
EFC control: DAC
Streaming Capability 2x 10GbE ~250 MSps continuous from SOC
2x 10GbE 250 MSps from each RF channel
Complex 32-bit FFT trace out
16-bit IQ (16-bit I, 16-bit Q) out
On-receiver modrec/modcat/demod
ADC Type: AD9680, 2-channel, 14-bit JESD
Sample rate: 500 MSps/channel
Alias-protected bandwidth: 192.5 MHz
Analog Inputs RF input ports: 2 ea. per channel, 2.92 mm
GPS: SMA
10 MHz In: SMA
1 PPS (IRIG-B support): SMA
Analog Outputs 10 MHz: SMA
375 MHz IF / 0–80 MHz: SMA (optional)
1 PPS: SMA
Sync Interface LVDS Sync: Micro-D
GPS: Trimble RES SMT 720 SMA
IRIG-B for Optical Interface: SMA
External Connectivity SFP+ from FPGA: 2 ea
SFP+ 10 GbE from SOC: 2 ea
USB 3 Type C: 1 ea
Open Architecture VITA 49 compatible: Yes
CMOS compatible: Yes
Customer access to DSP capabilities for custom processing: Yes
Multi-Channel Receiver Port Daisy-chain n local receivers for phase coherency: Yes
Time Sync Out: 1 ea
Time Sync In: 1 ea
SysRef Out: 1 ea
SysRef In: 2 ea
250 MHz Ref Out: 1 ea
250 MHz Ref In: 1 ea
ADC Clock In: 1 ea
SPI Bus: 1 ea
I2C Bus: 1 ea
DIO: 2 ea
Expansion Port SPI from SOC: 1 ea (with two chip selects)
UART from SOC: 1 ea
I2C from MCU: 1 ea
SPI from FPGA: 1 ea (with two chip selects)
DIOs from FPGA: 1 ea
Muxout to FPGA: 1 ea
Power: +5 V dc @ 1 A, —5 V dc @ 500 mA
General Input voltage: 10–50 V dc
Power consumption: TBD
Power connector: 4-pin LEMO
Enclosure size (in, approx.): Dual-channel.........8×8×4.5, Single-channel......8×8×3.5
Operating temperature: —20 to +50° C (—4 to +122° F)
Weight: TBD
Cooling: Internal fans

Defender n-IQ is proudly designed and manufactured in the USA